200KW~2000KW Wound Rotor Asynchronous Electric Motor

Asynchronous Electric Motor 1.Motor center height:400-630mm 2.Power:200-2000KW 3.Speed:492~1488rpm 4.Mounting type:IMB3

200KW~2000KW Wound Rotor Asynchronous Elelctric Motor 

 

 

Application

YR.YRKS series (10KV) motor is of wound rotor three phase asynchronous electric motor ,which produced according to JB/T 10445-2004 (center height from 400mm to 630mm).This motor can be used directly with starting 10KV,so that it is Energy-saving, investment-saving and simplified equipments. he protection degree of the YR series motor is of IP23 and the cooling method is of IC01, The YRKS series motor is of IP44/IP45 and the cooling method is of ICW81A.

This motor can generate larger starting torque at the state of relatively lower starting current,It used where the capacity of the feeder line is insufficient to start a squirrel cage motor or where the longer starting time and frequent starting are needed or where adjustment of speed or where adjustment of speed is needed within a limited range such as windless,press machines,drawing machines.

The structure and the mounting type is of IMB3 with continuous duty (S1).The rated frequency is 50HZ and the rated voltage is 10KV,other voltage requirement or special requirements should be negotiate with the manufacturer before order is placed.

Feature

The motor has such advantage as high efficiency, energysaving, low noise, low vibration, light weight and reliable performance. They are easy for installation and maintenance.

Performance parameters Table

                                       

 

When ordering,te following requirementsshould be specified:

1.Rated power

2.Rated voltage

3.Synchronous speed

4.Mounting type

5.Protection degree

6.Cooling methord

7.Insulation class

8.Ambient:elevation,temperature

 

Our technology

 

 

 

200KW~2000KW Wound Rotor Asynchronous Electric Motor